Re: [drm] drmOpen failed

["Ian B. MacDonald" <imac at netstatz dot com>]

On Tue, 2004-04-13 at 18:12, Tristan Seligmann wrote:
> Do you have AGPGART support compiled in, or (preferable) compiled as a
> module for your chipset? If so, then also check that you have both the
> agpgart module loaded, and the one specific to your AGP chipset; in 2.4
> you only needed the agpgart module, but in 2.6 you also need the
> chipset-specific one loaded.

Ahah, I did have the AGP compiled in. I also had both ATI and VIA
chipsets compiled in (figured this was the motherboard chipset
originally, hence the staticness).  I forgot to mention that the radeon
DRI/DRM was working with the current compiled in AGP.  I also did not
mention that normally I have a second head on a Matrox card, but that is
all disabled currently (no kernel or X11 support). Here is an lspci
excerpt.

0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
0000:00:0b.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2064W [Millennium] (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc R200 BB [Radeon All in Wonder 8500DV]
0000:01:00.1 PCI bridge: ATI Technologies Inc: Unknown device 4243
0000:02:00.0 FireWire (IEEE 1394): Lucent Microelectronics FW323 (rev 04)

Going to try AGP+ATI RadeonIGP as modules (in addition to radeon,
radeonfb and frglx).  

Thanks for the help,
iMac.
-- 
Ian B. MacDonald <imac at netstatz dot com>