[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Problems with fglrx
- From: Santiago Vazquez Salgado <okupita at tiscali dot es>
- Date: Wed, 12 May 2004 12:24:22 +0200
Flavio Stanchina escribió:
Santiago Vazquez Salgado wrote:
hi, i compiled the fglrx driver under a kernel 2.6.5 without errors
(it seems) but.. there is no 3d accel.. three months away i have
accel under knoppix and the same laptop (centrino whit ati radeon
9600) so i send you my lspci, my XF86Config-4, my kernel
configuration and my log of XFree thinking that you can help me.
I can't spot any clues in the XFree86 log: it says "DRI initialization
failed!" but there's no useful information about why it did.
Make sure that the agpgart, intel-agp and fglrx kernel modules are
loaded (look at the output from lsmod).
If they are loaded but you still don't get 3D acceleration, send along
the output from dmesg.
well try to load the modules (fglrx was not loaded) and it says that (i
send you dmesg copy) O_o it is very very rare
pdta: sorry but i am spanish and my english is too badly
thanks
rsion 2.6.5 (root at Luis-alfredo) (gcc versi?n 3.3.3 (Debian 20040429)) #1 Tue May 11 00:04:42 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
BIOS-e820: 000000001ff70000 - 000000001ff7b000 (ACPI data)
BIOS-e820: 000000001ff7b000 - 000000001ff80000 (ACPI NVS)
BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffff000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 130928
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126832 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f66b0
ACPI: RSDT (v001 PTLTD Wistron 0x06040000 LTP 0x00000000) @ 0x1ff76290
ACPI: FADT (v001 INTEL ODEM 0x06040000 PTL 0x00000050) @ 0x1ff7aed2
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1ff7afd8
ACPI: SSDT (v001 INTEL GV3Ref 0x00001001 MSFT 0x0100000e) @ 0x1ff762c0
ACPI: DSDT (v001 INTEL ODEM 0x06040000 MSFT 0x0100000e) @ 0x00000000
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Debian-okupita ro root=30a BOOT_FILE=/vmlinuz
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 598.355 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 512660k/523712k available (3217k kernel code, 10284k reserved, 1135k data, 188k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1179.64 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000
CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd7d5, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
ACPI: Embedded Controller [EC0] (gpe 28)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
Linux Kernel Card Services
options: [pci] [pm]
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
NET: Registered protocol family 23
vesafb: framebuffer at 0xd8000000, mapped to 0xe080c000, size 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:54e5
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
Simple Boot Flag at 0x36 set to 0x1
speedstep-centrino: found "Intel(R) Pentium(R) M processor 1400MHz": max frequency: 1400000kHz
IA-32 Microcode Update Driver: v1.13 <tigran at veritas dot com>
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Installing knfsd (copyright (C) 1996 okir at monad dot swb dot de).
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: AC Adapter [ADP1] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states)
ACPI: Thermal Zone [THRC] (35 C)
ACPI: Thermal Zone [THRS] (37 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Console: switching to colour frame buffer device 128x48
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] Initialized r128 2.5.0 20030725 on minor 1
[drm] Initialized radeon 1.9.0 20020828 on minor 2
Using anticipatory io scheduler
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
b44.c:v0.92 (Nov 4, 2003)
PCI: Setting latency timer of device 0000:02:05.0 to 64
eth0: Broadcom 4400 10/100BaseT Ethernet 00:0a:e4:4d:91:2f
PPP generic driver version 2.4.2
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK4019GAX, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
SCSI Media Changer driver v0.22 for Linux 2.6.5
ieee1394: Initialized config rom entry `ip1394'
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB USB2
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 10, pci mem e186e000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB USB (Hub #1)
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 00001800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB USB (Hub #2)
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 00001820
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB USB (Hub #3)
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 00001840
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
logibm.c: Didn't find Logitech busmouse at 0x23c
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
Synaptics Touchpad, model: 1
Firmware: 5.8
180 degree mounted touchpad
Sensor: 18
new absolute packet format
Touchpad has extended capability bits
-> 4 multi-buttons, i.e. besides standard buttons
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Linux telephony interface: v1.00
$Id: msg00039.html 388 2007-02-26 20:11:02Z flavio $
Advanced Linux Sound Architecture Driver Version 1.0.4rc2 (Tue Mar 30 08:19:30 2004 UTC).
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49263 usecs
intel8x0: clocking to 48000
PCI: Setting latency timer of device 0000:00:1f.6 to 64
ALSA device list:
#0: Intel 82801DB-ICH4 at 0xd0000c00, irq 10
#1: Intel 82801DB-ICH4 Modem at 0x2400, irq 10
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 4
IrCOMM protocol (Dag Brattli)
ACPI: (supports S0 S3 S4 S5)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 188k freed
Adding 530092k swap on /dev/hda6. Priority:-1 extents:1
EXT3 FS on hda10, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 256M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 388 $ 8 ports, IRQ sharing disabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
slamr: no version for "struct_module" found: kernel tainted.
slamr: module license 'Smart Link Ltd.' taints kernel.
slamr: SmartLink AMRMO modem.
slamr: probe 8086:24c6 ICH4 card...
PCI: Setting latency timer of device 0000:00:1f.6 to 64
slamr: mc97 codec is SIL27
slamr: slamr0 is ICH4 card.
ohci1394: $Rev: 388 $ Ben Collins <bcollins at debian dot org>
PCI: Setting latency timer of device 0000:02:09.2 to 64
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[d0203000-d02037ff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[04e40a00e3481005]
b44: eth0: Link is down.
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
mtrr: 0xd8000000,0x4000000 overlaps existing 0xd8000000,0x1000000
Unable to load NLS charset cp437
ndiswrapper version 0.7 loaded
ndiswrapper adding w22n51.sys
PCI: Enabling device 0000:02:06.0 (0000 -> 0002)
wlan0: ndiswrapper ethernet device 00:0e:35:01:49:bc using driver w22n51.sys
ndiswrapper Buggy windows driver w22n51.sys left an active timer. Trying to fix
ndiswrapper version 0.7 loaded
ndiswrapper adding w22n51.sys
PCI: Enabling device 0000:02:06.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:02:06.0 to 64
wlan0: ndiswrapper ethernet device 00:0e:35:01:49:bc using driver w22n51.sys
ndiswrapper Buggy windows driver w22n51.sys left an active timer. Trying to fix
ndiswrapper version 0.7 loaded
ndiswrapper adding w22n51.sys
PCI: Enabling device 0000:02:06.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:02:06.0 to 64
wlan0: ndiswrapper ethernet device 00:0e:35:01:49:bc using driver w22n51.sys
fglrx: no version for "struct_module" found: kernel tainted.
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 429 MBytes.
[fglrx:firegl_stub_register] *ERROR* Fire GL kernel module has to be loaded prior to any other DRM kernel module!
[drm] Initialized i830 1.3.2 20021108 on minor 3
[drm] Initialized i810 1.4.0 20030605 on minor 4
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 429 MBytes.
[fglrx:firegl_stub_register] *ERROR* Fire GL kernel module has to be loaded prior to any other DRM kernel module!
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 429 MBytes.
[fglrx:firegl_stub_register] *ERROR* Fire GL kernel module has to be loaded prior to any other DRM kernel module!
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 429 MBytes.
[fglrx:firegl_stub_register] *ERROR* Fire GL kernel module has to be loaded prior to any other DRM kernel module!
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 429 MBytes.
[fglrx:firegl_stub_register] *ERROR* Fire GL kernel module has to be loaded prior to any other DRM kernel module!
mtrr: 0xd8000000,0x4000000 overlaps existing 0xd8000000,0x1000000
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 429 MBytes.
[fglrx:firegl_stub_register] *ERROR* Fire GL kernel module has to be loaded prior to any other DRM kernel module!
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 429 MBytes.
[fglrx:firegl_stub_register] *ERROR* Fire GL kernel module has to be loaded prior to any other DRM kernel module!
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 429 MBytes.
[fglrx:firegl_stub_register] *ERROR* Fire GL kernel module has to be loaded prior to any other DRM kernel module!
mtrr: 0xd8000000,0x4000000 overlaps existing 0xd8000000,0x1000000
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 429 MBytes.
[fglrx:firegl_stub_register] *ERROR* Fire GL kernel module has to be loaded prior to any other DRM kernel module!