[Fwd: Re: 8.16.20-1 does not work on sarge with 1400x1050]

[Thomas Stegbauer <thomas dot stegbauer at tronicplanet dot de>]

sorry, wrong receipient. the courier-listmanager seems not to set the
correct answer-to ;/


-------- Original-Nachricht --------
Betreff: 	Re: [fglrx] 8.16.20-1 does not work on sarge with 1400x1050
Datum: 	Sun, 23 Oct 2005 22:52:23 +0200
Von: 	Thomas Stegbauer <thomas dot stegbauer at tronicplanet dot de>
An: 	János Holányi <csani at lme dot linux dot hu>
Referenzen: 	<4358F88D dot 2040302 at tronicplanet dot de>
<20051023075006 dot M88218 at utca dot hu>



hi János,

thanx for that hint, it solved it. i currently running with  8.16.20-1

greetings
thomas

János Holányi schrieb:

> Hi,
> and for everyone with similar problem (no 1400x1050)
>
> I finally could re-enable 1400x1050 by following the advice of Michel Dänzer
> (thanks, Michel!) and I specified a separate ModeLine in the Monitor section
> of the config file.
>
> How can you create a good ModeLine?
> For example, start up the server with any driver that gives you 1400x1050 (I
> used the DRI radeon driver for that because I didn't have the previous working
> fglrx packages around any more) and run "xvidtune" in a terminal (with a
> proper DISPLAY value - e.g. :0) where you adjust settings until the screen is
> good for you (I didn't have to change anything) and finally press "Show"
> button. It will display the modeline to insert into the X config file, just
> put "ModeLine" at the beginning of the line and that's it.
>
> My line looks like:
>
> ModeLine  "1400x1050"  108.00  1400 34208 34320 1688  1050 1050 1053 1063
>
> Best regards,
> Csani
>
> On Fri, 21 Oct 2005 16:17:49 +0200, Thomas Stegbauer wrote
>  
>
> > hi ml,
> >
> > i am running debian sarge with debian 2.6.8-2-686 kernel on a maxdata
> > pro 8100is with a 0000:01:00.0 VGA compatible controller: ATI
> > Technologies Inc RV350 [Mobility Radeon 9600 M10]
> >
> > (II) Primary Device is: PCI 01:00:0
> > (--) Assigning device section with no busID to primary device
> > (--) Chipset MOBILITY RADEON 9600/9700 (M10/M11 4E50) found
> >
> > i running resolution 1400x1050 with the
> > ii  fglrx-control-qt3                  8.14.13-2
> > ii  fglrx-driver                       8.14.13-2
> > hi  fglrx-kernel-2.6.8-2-686           8.14.13-1+2.6.8-16
> >
> > cause laziness, i didn't recompile my own kernel-module.
> >
> > to get a proper system without a version-conflict i tried the latest
> > version 8.16.20-1 but with this i cant startup the xfree system, 
> > cause the get "no screen found" ? and it dies.
> >
> > greetings
> > thomas
> >
> > btw: does there know somebody how to get the synaptics touchpad 
> > known as first mouse on psaux if a usb-mouse is connected? cause if 
> > the usb-mouse is connected on startup it get detected as first mouse 
> > on psaux and of course this is not a synaptics touchpad ;)
> >
> > greetz
> > again





-- 
# Thomas Stegbauer
# http://www.keyserver.de:11371/pks/lookup?op=get&search=0x275931BF
# Key fingerprint = 984E D4B1 E91E F349 5057  B6AC 65CE C0FC 2759 31BF